Air conditioning cost in Basingstoke

What a home system costs to install and run, what moves the price, and how to get a figure for your own rooms.

Updated October 20266 min read

Starting prices

These are ProAir’s published starting prices for a standard installation of wall-mounted units.

Starting prices for wall-mounted air conditioning
SystemTypical useFrom
Single roomOne bedroom or a home office£1,650
Two roomsTwo bedrooms, or a bedroom and an office£1,950
Three roomsMost of the upstairs in a typical house£2,400

What “from” means

A starting price covers a straightforward job: a short pipe run, an outdoor unit at ground level and a power supply close by. The survey confirms whether your home fits that.

Whole home or ducted

usually

£6,000 to £20,000+

Depends on the number of rooms, the system type and how much building work is involved. Compare whole-home options.

What pushes the price up

Most of the difference between two quotes for the same number of rooms comes from the building, not the equipment.

  • Longer pipe runs. If the outdoor unit has to sit a long way from the indoor unit, more pipe, cable and labour are needed.
  • Where the outdoor unit goes. A unit on wall brackets high up, or on a flat roof, takes longer to fit safely than one on the ground.
  • Larger or sunnier rooms. These need a higher-capacity unit.
  • Electrical work. Some homes need a new circuit from the consumer unit.
  • Hidden pipework. Running pipes inside walls, ceilings or the loft costs more than neat surface trunking.
  • How several rooms are served. Rooms can share one outdoor unit or each have their own, and the two are priced differently.

Running costs

What a unit costs to run depends on how hard it works, how long it runs and what you pay for electricity. You can estimate it from the unit’s power draw.

Scroll sideways to see the full table

Worked running-cost examples
ExamplePower drawHours a dayUnit rateCost a day
Bedroom, overnight0.5 kW625p/kWhabout 75p
Home office, working day0.8 kW825p/kWhabout £1.60

Use your own tariff

These are worked examples, not quotes. Your bill shows your unit rate in pence per kWh. Multiply it by the unit’s power draw and the hours you expect to use it.

Getting a figure

  1. Start the online estimateRooms, rough sizes and where an outdoor unit might go.
  2. Book the surveyAn installer checks your home and answers questions.
  3. Get your written quoteBased on the survey. Nothing is booked until you accept.

Ready for a figure?

It takes a few minutes and doesn’t commit you to anything.

Questions people ask

Do I need planning permission?

Many home installations count as permitted development, so no application is needed. Listed buildings, conservation areas, flats and units close to a boundary can be different. The surveyor will tell you if anything needs checking with Basingstoke and Deane Borough Council.

How much mess is there?

A wall-unit installation needs one small hole through an outside wall for the pipes. Installers use dust sheets and clear up before they leave.

Is it noisy?

Indoor units are designed for bedrooms and have quiet settings for night-time. The outdoor unit makes a steady fan noise when it runs, so the survey looks for a spot away from windows, including your neighbours’.

Start my estimateCall 0800 009 6300